- BRAKE WORK SPECIALISTS
DIAGNOSTICS.
ACTUAL ANSWERS.
We are the trusted choice for accurate diagnostics in Southern Utah because our technicians use factory level tools to read your check engine light’s message.
The cheap code reader from the store may point you in a general direction, but it fails to go past a basic symptom and rarely – if ever – gets to the root of the problem.
- CALL 435-275-2314
- Check Engine Light & Diagnostics
THE CHECK ENGINE WARNING IS A STARTING POINT
Let’s say your BMW issues a P0300 alert. It means that your engine misfires. However, the code does not say why. Expert diagnostics, combined with factory level tools, will differentiate between worn spark plugs, failing ignition coils (common with an M Series), and intake leaks.
As a result, our technicians never start replacing the part most commonly associated with the error code. Instead, we pinpoint the actual issue and take the steps needed to mitigate it. And because we have been doing this for a while, our team knows what to look for first when your ride flashes an error code. This is not a time to guess.
- WHAT WE DO
FULL SERVICE MENU
Every job is held to the same exceptional standards. We provide
dealer-level diagnostics at independent prices, supported by
authentic expertise and extensive real-world experience.
CHECK ENGINE LIGHT DIAGNOSIS
Comprehensive vehicle module scanning, code retrieval, and live-data analysis paint an accurate picture before we recommend any repair work.
FACTORY-LEVEL SCAN TOOLS
Advanced diagnostics tools like the BMW-MINI ISTA/ICOM, Audi VCDS, and Jaguar TOPIx Cloud give us factory-level insight into the causes behind error codes.
DRIVABILITY ISSUES
Get to the bottom of what causes an engine’s misfire or poor fuel economy. Know precisely why the car hesitates, or the idle has become rough.
ELECTRICAL DIAGNOSIS
Are you dealing with voltage issues, or module communication failures that mimic wiring faults? Our technicians accurately nail these evry.
PRE-PURCHASE INSPECTION
Is that used BMW a steal, or is it someone else’s problem? Let us check for hidden codes, inspect mechanical systems, and scan every module.
WARNING LIGHT RESET (AFTER REPAIR).
Once we replace or repair the failed engine component, we clear the code. We do not just make the warning go away. This is standard.
- WHY BAVARIAN WERKSTÄTTE
AN ACCURATE DIAGNOSIS SAVES YOU MONEY AND TIME.
We are the trusted choice for accurate diagnostics in Southern Utah because we identify the root cause of a check engine light. While others may start replacing parts based only on diagnostic codes, we go further. Our technicians get the diagnostics and subsequent fix right the first time.
Be in the driver’s seat of your car’s repairs and parts replacement. We tell you what is wrong, the best course of action, and what it will cost. There is no guessing; only facts. Once you understand the problem and all repair options, you can make an informed decision.
UNMASK THAT CHECK ENGINE LIGHT.
- CALL 435-275-2314
- PLATFORMS
DIAGNOSTICS ON ALL PLATFORMS.
Every major brand, every major scan tool, every major fault pattern.
BMW (ISTA + diagnostics)
MINI (ISTA + diagnostics)
INEOS (AVD / BOSCH)
Land Rover (TOPIx / JLR / Bosch)
Jaguar (TOPIx / JLR / Bosch)
Lexus (GTS+ / Techstream)
Acura (i-HDS / J2534
- THE FIRST STEP • NO SUPRISES
PRECISION DIAGNOSTICS.
This depends on if you have a warning light on the dash, which is a flat fee, or if you just have a running issue, which requires manual diagnosis by our qualified technicians at our hourly rate. Some instances may require both due to the specific issue and to ensure we can accurately diagnose the root cause of your vehicles' problem.
01
FAULT CODE READ WITH FULL REPORT FOR ALL VEHICLE MAKES - $95
- BMW, MINI, INEOS, ROVER, JAGUAR, LEXUS AND ACURA, including diesel engines.
- Advanced factory level diagnostic scan tools that deliver the most accurate and detailed information.
- Highly experienced technicians that can identify and discern issues present on the report.
02
MANUAL INSPECTION - Additional cost of $95 - $225 (depending on amount of time if takes and your make/engine type)
- BMW, MINI, INEOS, JAGUAR, LEXUS AND ACURA $189/hr.
- DIESEL/ROVER $225/hr.
- Required for issues without a warning light present or issues that cannot be clearly identified directly from the fault code report.
- Minimum of a half hour up to a maximum of 1 hour at our hourly labor rate per your make/engine type.
- Any additional diagnosis time required for extensive issues will be communicated, a cost estimate provided and will require customer approval to complete.
EXAMPLE:
For a 2012 BMW 325i:
- Customer states vehicle has check engine light and rough running issue.
- This requires a diagnostic scan for the check engine light to get full fault code report. Report identifies misfire in cylinder#3.
- This requires additional manual diagnostics up to 1 hour on individual vehicle components to identify possible faulty spark plug, ignition coil or fuel injector.
- If all of those components are in working condition, we will communicate this with you and get your approval to perform more in-depth and complete diagnostic to determine the cause of the misfire.
HOW IT WORKS
- We document your concern in detail for our qualified technicians.
- We run a complete diagnostic fault code scan if needed, and/or manually inspect your vehicle.
- We detail our findings in a complete digital inspection, complete with photos and videos if applicable, that you can review right from your mobile device.
- Easily communicate any questions or concerns with our service department via phone/text/email right from your personalized link.
- Your diagnostic fee will be detailed separately from your estimated repair items. You review everything on your own time and approve or decline online.
- No parts are ordered and no work begins until we receive your signed approval and half of your total payment down.